I recently bought a USB to LAN RJ45 Ethernet Network Adapter off ebay.

While it was working fine under Win7 (I had to install the drivers from the small CD), I could not get it to work under Debian Squeeze.

USB 2.0 Ethernet Adapter Install করার পরও ইন্টারনেট পাওয়া যায়না। তাহলে এই ভিডিওটি আপনার.
RD9700 USB Ethernet Adapter is a Shareware software in the category Internet developed by Corechip Semiconductor. It was checked for updates 94 times by the users of our client application UpdateStar during the last month. The latest version of RD9700 USB Ethernet Adapter is.

Usb To Ethernet Adapter Drivers free download - Linksys Compact Wireless-G USB Adapter, D-Link DFE-520TX PCI Fast Ethernet Adapter, USB 2.0 10/100Base Ethernet Adapter, and many more programs.

I had to compile the drivers.

On the CD, there were a few folders:

– DM9601

Winx club sirenix battle games. – RD9700

I chose RD9700, this is what worked on Win7.

DM9601 would have worked as well, just follow the same instructions…

Now, copy the contents of the RD9700/Linux to a folder.

What you will need to compile:

Open a shell and get the proper headers for your kernel version

Download Rd9700 Usb2.0 To Fast Ethernet Adapter Driver For Mac Air Download

Type: (or copy and paste)

Bass pro xps 5 5 battery charger manual. apt-get update

apt-get install linux-headers-`uname -r`

if you type uname -r it is useful to get your kernel version

You probably have the next package installed, it is necessary to compile stuff on your linux box

apt-get build-essential

You can install those with synaptic package manager.

Now go to the folder where you copied the files and type:

make

This is where I ran into problems…

make[1]: Entering directory `/usr/src/linux-headers-2.6.32-5-686′
CC [M] /usr/src/usblan/rd9700/qf9700.o
/usr/src/usblan/rd9700/qf9700.c: In function âqf9700_bindâ:
/usr/src/usblan/rd9700/qf9700.c:380: error: âstruct net_deviceâ has no member named âdo_ioctlâ
/usr/src/usblan/rd9700/qf9700.c:381: error: âstruct net_deviceâ has no member named âset_multicast_listâ
/usr/src/usblan/rd9700/qf9700.c: In function âqf9700_rx_fixupâ:
/usr/src/usblan/rd9700/qf9700.c:443: error: âstruct usbnetâ has no member named âstatsâ
/usr/src/usblan/rd9700/qf9700.c:444: error: âstruct usbnetâ has no member named âstatsâ
/usr/src/usblan/rd9700/qf9700.c:445: error: âstruct usbnetâ has no member named âstatsâ
/usr/src/usblan/rd9700/qf9700.c:446: error: âstruct usbnetâ has no member named âstatsâ
/usr/src/usblan/rd9700/qf9700.c:447: error: âstruct usbnetâ has no member named âstatsâ
make[4]: *** [/usr/src/usblan/rd9700/qf9700.o] Error 1
make[3]: *** [_module_/usr/src/usblan/rd9700] Error 2
make[2]: *** [sub-make] Error 2
make[1]: *** [all] Error 2
make[1]: Leaving directory `/usr/src/linux-headers-2.6.32-5-686′
make: *** [all] Error 2

No matter what I did, I could not get the driver to compile…

After a while, I found these:

I downloaded QF9700-source.zip from

and extracted the contents into the same folder.

I ran make clean and then make

No errors.

All you need to do now, is to copy the .ko file to /lib/modules/`uname -r`/kernel/drivers/net/usb

then run depmod to register the module,

Download Rd9700 Usb2.0 To Fast Ethernet Adapter Driver For Mac Air Pro

modprobe usbnet and

insmod /lib/modules/`uname -r`/kernel/drivers/net/usb/qf9700.ko

and voilà the driver should be installed.

You can verify that you have a new network interface with

ifconfig

Download Rd9700 Usb2.0 To Fast Ethernet Adapter Driver For Mac Air 2

I got a new eth1 🙂

You then have to configure it the usual way:

nano -w /etc/network/interfaces

auto eth1
iface eth1 inet dhcp

For dhcp. You might have a different eth device, replace eth1 with the proper one such as eth0

Restart networks:

/etc/init.d/networking restart

or service networking restart

or it is just as easy to reboot

Download Rd9700 Usb2.0 To Fast Ethernet Adapter Driver For Mac Air 1

I might have forgotten a few steps, i am writing this off the top of my head. Hope it helped someone!